16
BRILLIANCE 3.0
CLEANING AND CARE
Disassemble the espresso group
To remove the espresso group follow the following steps:
06
05
03
04
02
01
To remove the espresso group follow the following steps:
Open the door and push down the
outlet beam.
Loosen the fixation screw at the bottom of the brewer.
Put your hand under the brewer, push up and
forward at the same time until the brewer is
detached at the back.
Loosen the outlet tube from the brewer
by pulling it straight out.
Pull the brewer straight out.
Press down the safty ring on the connector simultaneously
pull the teflon tube straight up.
Summary of Contents for BRILLIANCE 3.0
