34
BRILLIANCE 3.0
Recipe explanation
PROGRAMMING
The next three parameter set the hot water coming out from
the hot water spout. This water will not be mixed with any
instant powder. Here we can set the “Pause Water2” and the
“Time2Water2” to 0. With “Enter” we will accept the different
settings and proceed to following.
Now we will set the times for the mixer (Mixer Time 1). This time
setting, adjusts how long will the mixer run while receiving the
water and the instant powder. With buttons “+” and “-“ we adjust
the time; with “enter” we accept the setting, and proceed to the
next adjustment.
The following parameter(Mixer time 2) controls if water will come
out or not from infusion water spout, set it to 0 as to stop water
from coming out the hot water for infusion spout. Make it bigger
than 0 as to allow the machine to dispose the hot water from this
spout. with buttons “+“ and “-“ adjust the desired value, with enter
proceed to the next parameter.
Time 1 Water 2
Key 1 ↑## ↓s.
Pause Water 2
Key 1 ↑## ↓s.
Time 2 Water 2
Key 1 ↑## ↓s.
Press
K6
Press
K6
Press
K6
K2
Time 1 Water 2 Pause Water2 Time 2 Water2
Water 2
Mixer Time 1
Mixer Time 2= 0
Mixer Time 2> 0
The following parameter (Mixer time 2) is not used in this
machine (let it as 0).
Mixer Time 1
key 1 ↑## ↓s.
Mixer Time 2
key 1 ↑## ↓s.
Press
K6
Press
K6
Press
K6
Press
K6
K2
K2
Summary of Contents for BRILLIANCE 3.0
