11
BRILLIANCE 3.0
CLEANING PROGRAM
Rinsing
Rinsing
This rinsing function allows for an easy cleaning of the outlets of the machine.
Rinsing is recommended at least once a week, but preferable every day,
especially if used in high consumption environments. This software routine
flushes the different outlets of the machine, Starting with the mixing system
and finishing with the espresso group.
Place a cup under the outlet after, Insert the cleaning card in the card reader,
the display will show: “Rinsing” .
Just press, “Enter” to run this function, and wait until the cycle is finished. Take
into consideration that the door of the machine has to be closed (as long as
it is open, the cleaning will not start). The process can be canceled by pressing
“Canc”. When the routine has finished, the machine will return into service
and the message “Select Beverage” will show on the display. This function
takes about 1min 45secs, and uses aprox. 150ml of water.
K1
_
Canc
+
Enter
K2
K3
K4
K5
K6
K7
K8
A
Summary of Contents for BRILLIANCE 3.0
