Digital fire detection control panel
LYON
FIRE PROTECTION MANUFACTURER
Ctra. de Molins de Rei a Rubí, Km. 8,4 - 08191 RUBÍ (Barcelona) ESPAÑA.
52
Tlf.: +34 935 862 690 - Fax:+34 936 999 261 - [email protected] -
www.cofem.com
3.2.1.5.- Silence buzzer.
Key that enables the buzzer sound to be stopped after it has been activated by an
incident. It is automatically reactivated for each new incident.
3.2.2. - Level 2 access.
3.2.2.1. - Access code.
P a s s w o r d
L e v e l 2 :
0 0
When pressing the menu key we access level 2 by means of a code (027). At this new level we will
be able, among other things, to deactivate incidents, to put zones into service, to disable zones and to activate
and deactivate relays.
3.2.2.2.- Front panel keypad.
Disable configured relay delays.
Deactivate all relays that are configured as sirens.
Activate all relays programmed as sirens and switches.
Change to manual mode and disable all automatic activations of
relays.
RESET
Key that enables the events generated in the system to be reset.
3.2.2.3.- Reset events.
After any of the incidents previously described have been detected and the access code to level 2 has
been entered, pressing the RESET key will deactivate these incidents, thereby resetting them. If these
incidents were faults, before resetting we must ensure that they have been corrected, otherwise they will re-
appear on the screen.
3.2.2.4.- Monitor.
Option 1 of the main menu,
MONITOR. It enables the readings and the configuration of the various
analogue sensors to be seen. By entering the loop and elements numbers, we can see the type (optical,
thermal, relays module, master module, etc), the label and the manufacturer’s programming number. In the
case of optical and thermal sensors we will also see the last five measurements.
Monitor message of an optical sensor:
L A B E L
T y p e : A 3 0 X H A
L o o p :
0 0 1
A d r e s s :
0 0 1
S . N u m .
:
5 5 8 2 6
V a l u e s :
[ 0 0 0
0 0 0
0 0 0
0 0 0 ]
T e m p :
0 2 5
D i r t : 0 0 0 %
A v e r a g e : 0 0 0
S e n s i t i b : M E D
In the case of a thermal sensor, the values are monitored in degrees.
L A B E L
T y p E : A 3 0 X T A
L O O P :
0 0 1
A d r e s s : 0 0 1
N . P r o g
:
5 5 8 2 6
V a l u e s :
[ 0 2 5
0 2 5
0 2 5
0 2 5 ]
T e m p :
0 2 5
D i r t :
- - - % A v e r a g e :
0 0 0
S e n s i t i v : M E D
