Prior to changing lenses, it is advisable to turn off the lamp; to facilitate the replacement operation, it is advisable to rotate the body
of the projector through 90° with respect to the base.
1) Loosen the 6 screws (A) using an appropriate screwdriver.
2) Rotate and remove the fixing ring.
3) Remove the currently installed lense.
5) After having inserted a new lense, replace the retaining ring and refasten the screws.
Care should be taken in carrying out this procedure; the seal should be correctly seated and the screws should be firmly tightened
in order to maintain the protection rating of the unit.
The drain hole .(see diagram) should never be obstructed.
4) Insert the new lense most suited to your particular appli-
cation. All lenses are rotatable through 360°
Attention
Direct exposure to the output of the unit is not recommended.
22
English