The control panel of the
Panorama Cyc 250 C. is fitted with a further
6 additional dip-switches to those described in sec-
tion
13
. These are used to alter several parameters of the unit.
Testing the projector
Setting the test dip-switch to the
ON
position will cause the
Panorama Cyc 250 C
to carry out a self-test function.
Fans
Setting the fan dip-switch to the
ON
position will cause the fans to remain on at all times the projector is powered up. In the
OFF
position, the fans will operate only when the lamp is switched on.
Lamp control
With the lamp dip-switch in the
ON
position, the lamp will remain on at all times the projector is powered up. In the
OFF
position,
the lamp will be controlled via
DMX
signal.
Motor calibration
The motor calibration dip-switch in the
ON
position will allow for motor offsets to be recalibrated.
For further information about this, read section
24. Electronic motor alignment
.
Inhibiting colour changes
The colour mode dip-switch will inhibit colour change when in the
ON
position by over-riding
DMX
channel 2 (which controls
colour changing).
dr 1
dialog
The
dr1
remote
dip-switch, when switched to the
ON
position, allows the dip-switch settings to be by-passed for communication
between the
Panorama Cyc 250 C.
and the
dr 1
.
For further information, refer to section
16. Remote operation using the
dr1
.
ON
ON
DR1
remote
ON
ON
colour
mode inhibit
ON
ON
motor
calibration
ON
ON
lamp ON
ON
ON
fan ON
ON
ON
test
15. Dip-switch functions
17
English