Running programs in a continuous sequence
Setting dip-switches
All PR
in the
ON
position causes all the pre-recorded programs to run in an automated continuous sequen-
ce.
14.2 “slaves”
All projectors which are connected to a “
Master
” unit should be set to “
Slave
”. Connections should be as described in section “9.3
Synchronising multiple Panorama fixtures without
DMX 512
”.
“
Slave
” units are recognisable since they have connections made to both XLR sockets in their base, except for the final unit in the
chain which has only one connection to its “
DMX IN
”.socket.
To set projectors to “
Slave
” mode, it is necessary to simply set dip-switches
1
to
9
in the
OFF position and the On-built in
program control dip switch to
ON
ON
ON - built in program control
PR 1 PR 2 PR 3 PR 4
T 1
T 2
SP 1
SP2
all PR
DMX addresses, ID personality or built in program and speed
16
English