Coemar Panorama Cyc 250 C., Instruction Manual, Page: 2 / 29

Index
1. Packaging Pag. 3
2.Transportation ,, 3
3.Important safety information ,, 3
4.Opening the projector ,, 4
5.Lamp: installation and replacement ,, 5
6.Operating voltage and frequency ,, 7
7.Installation ,, 7
7.1 Installing the unit in weather protected areas
,, 7
7.2 Installing the unit in exposed areas
,, 7
7.3 Warning
,, 7
8. Mains connection ,, 8
9.Signal connection ,, 9
9.1 Automated operation - “solo”
,, 9
9.2 Operation via DMX 512
,, 9
9.3 Synchronising multiple Panorama fixtures without DMX 512 signal
,, 10
10.Powering up ,, 11
11.DMX addressing ,, 12
12.Operating via DMX 512 signal ,, 13
13.Dip-switches settings for automated “solo” operation ,, 14
14.Operating multiple Panorama Cyc 250 C. in the absence of DMX signal ,, 15
14.1 “Master” units
,, 15
14.2 “Slave” units
,, 16
15.Dip-switch functions ,, 17
16.Remote operation using “ dr1 ” ,, 18
17.Auxiliary led and reset button functions ,, 19
18.Mechanical adjustments ,, 20
18.1 Tilt adjustment
,, 20
18.2 Altering beam angles by inserting diffusion filters
,, 21
19.Altering the operating voltage and frequency ,, 23
19.1 Selecting the operating voltage on the autotransformer
,, 23
19.2 Selecting the operating frequency on the power supply
,, 24
20.Opening the front of the projector ,, 25
21.Thermal protection ,, 27
22.Servo-controlled fan ,, 27
23.Maintenance ,, 27
24.Electronic motor alignment ,, 28
25.Spare parts ,, 29
2
English