Multiple
Panorama Cyc 250 C.
can be operated in the absence of control signal by executing internally stored, pre-recorded pro-
grams.
Projectors correctly connected together may operate in synchronised mode, the
Panorama Cyc 250 C
receiving signal being
denominated as “
slave
” units and those generating control signal designated as “
master
” units.
To activate this automated function, projectors must be connected together as described in the section entitled 9.3. “Synchronising
multiple
Panorama Cyc 250 C
fixtures without using
DMX 512
”; No signal cables should be connected to the external XLR3 soc-
kets.
Power up the projector and use the dip-switches to adjust to the correct settings.
14.1 “Masters”
Panorama Cyc 250 C
may operate automatically with output in the form of pre-recorded programs, as described in section
“9.3.
Synchronising multiple Panorama Cyc 250 C fixtures without using DMX 512”
Only one unit may be designated as
“
master
”.
Selecting a master unit is simply a matter of convenience and accessibility to the dip-switches:
Activating “auto” mode
Set to
ON
the dip-switch named
On-built in program control
. From this moment, the dip-switches
1
to
9
may be used to adjust
the various parameters for automated colour changes: program selection, fade times and speed.
Selecting automated colour change programs.
Dip-switches from
PR1
to
PR4
(program 1 to program 4), when switched to the
ON position,
activate preset colour change
programs.
The
4
inbuilt programs have the following features:
Program
1
: all colours, with the exception of open white, in a smooth, slow crossfade sequence
Program
2
: all colours in a smooth, slow crossfade sequence
Program
3
: all colours, with the exception of open white, in sequence.
Program
4
: all colours in sequence.
Selecting the hold time
Dip-switches
T1
and
T2
allow for one of
4
hold times for the various colours
Selecting the fade speed
Dip-switches
SP1
and
SP2
allow for one of
4
fade times to be selected.
Important note:
Only one program at a time may be selected.
ON
ON - built in program control
PR 1 PR 2 PR 3 PR 4
T 1
T 2
SP 1
SP2
all PR
built in program and speed
14. Operating multiple Panorama in synchronised mode without DMX 512
15
English