English
9
For installations on a reticular structure, we recommend using specific “C” hooks, suitable for supporting the weight. Normally, the “C” hooks are
tightened in the central hole of the cam-lock brackets, as shown in the picture below.
WARNING !
Always make sure that both the structure and the fixing devices (screws, clamps etc.)
are suitable for holding the weight of the unit.
The structure must also be sufficiently rigid so as not to move or shake whilst the
Infinity Wash M
projector moves during its operation. Make sure
that the supporting structure is not subject to torsion.
Do not install the projector in locations readily accessible by unauthorised or untrained personnel who is not aware of these safety instructions.
4.2 Safety connection
If the
Infinity Wash M
is fixed to a structure, the use of a safety chain is recommended in order to meet the current relevant safety standards. The
safety chain must pass through the holes “A” and then fixed to the structure itself.
If using steel wires or chains which have not been manufactured by
Coemar
, make sure that they are suitable for holding the weight of the unit.
5. Powering up
5.1 Connecting to mains power
Mains cable characteristics
The mains cable provided is complying with the most recent standards.
NB: In case of cable replacement, similar cable with comparable thermal resistant qualities must be used exclusively (cable 3X 1,5 ø external 10
mm, rated voltage 300/500V, test voltage 2 KV, operation temperature
-
40°C
+
180°C,
Coemar
cod. CV5311).
Connection to mains power
For connection to mains, use a connector of a suitable rating to sustain the maximum current: 200/208/230/240 Vac 8 amps constant current in
normal operation.
A
Summary of Contents for Infinity Wash M
Page 1: ...Infinity Wash M instruction manual manuale di istruzioni Version 0 DIS128 ...
Page 2: ......
Page 4: ......
