Coemar Infinity Wash M, Instruction Manual

Page: 26 / 29

English
26
11. Maintenance
11.1 Periodic cleaning
Lenses and filters
Even a fine layer of dust can reduce the luminous output and alter the compactness of the beam. Regularly clean all filters and lenses using a soft
cotton cloth, dampened with a specialist lens cleaning solution.
Fans and air passages
The fans and air passages must be cleaned approximately every 8 weeks; the length of the period between each cleaning will depend, of course,
upon the conditions in which the projector is operating. Suitable instruments for performing this type of maintenance are a brush and a common
vacuum cleaner or an air compressor.
If necessary, do not hesitate to carry this out even after a shorter period of time.
11.2 Periodic maintenance
Lamp
Check the lamp and replace it if there is any observable damage or deformation or if or if the time limit is close (check the resettable counter).
Mechanical parts
Periodically check the movement of all mechanical devices, and check driving belts, gears and lens guides. Replace them if necessary. Make sure
the projector is not mechanically damaged. If necessary, replace the worn parts. Check the tension of the belts and adjust them if necessary.
Electrical components
Check all electrical connections, in particular for correct earthing and correct attachment of all extractable connectors. Press the connectors if
necessary and reposition as before.
11.3 Fuse replacement
Check the conditions of the fuses using an appropriate instrument; if damaged, replace them with equivalent ones.
12. Spare parts
12.1 Spare parts
All the components of
Infinity Wash M are available as replacement spares from your authorized Coemar service centre. Accurate description of
the fixture, model number and type will assist us in providing for your requirements in an efficient and effective manner.