Coemar Infinity Wash M, Instruction Manual

Page: 15 / 29

English
15
8.3 Main functions
The projector gives the opportunity to change and customize some functional settings.
MAIN FUNCTIONS
<<Are you sure ?>>
-Lamp type
-Output frequency
-Reset Temp max
PAN/TILT
CMY SETTING
DIMMER SETTING
FANS MODE CONTROL
LAMP STRIKE DMX
RESET
RECALL DEFAULT
SETTING
ZAP EFFECT ENABLE
ID CODE
TEST MOTORS
PROJECTOR CONTROL
MODE
BALLAST SETTING
-Pan
-Tilt
-Dimmer
-Shutter
-Zoom
-Zoom select range
-Effect wheel
-Effect rotation
-Color wheel
-Cyan
-Magenta
-Yellow
-Zap effect
-Save all
It allows to move and
check every single
motor without using
DMX signal. SAVE
ALL allows to store
the motors position
until next fixture’s
start up.
It allows to choose an alternative colour insertion curve.
It allows to simulate dimming features of a Tungsten lamp or a Xenon lamp.
-NORMAL: fans are controleld by pcb in function of the internal temperature.
-HIGH:fans are always set at full power.
-STANDARD: the on/off state of the lamp’ s controller by DMX signal..
-ON: the lamp remains always on (please, see DMX chart).
It perform the reset function of the fixture.
Keeping pressed ENTER and MENU buttons during reset ,
it will access SPECIAL MODE (see special mode menu).
Restores all the functional settings (excepts for
address, motors, tuning and odometers) to default
values.
Enables or disables the lamp’s “zap”
effect.
Lets you set the ID code of the fixture
by using + or – buttons.
-Standard
-Special
-Tungsten
-Xenon
-Normal
-High
-On
-Standard
-All
-Pan/Tilt only
-Effect Only
-On
-Off
from 1 to #
Default IP address
Custom IP address
Universe address
MAC address
Default IP address
Custom IP address
Universe address
MAC address
It allows to configure
the fixture to be
controlled by
ARTnet protocol.
It allows to control
the fixture setted in
a DMX chain by
ARTnet controller.
-575 W lamp power
-700 W lamp power
- Hz value
<<Are you sure ?>>
It resets the ballast’s
temperature value.
It allows the complete management of the horizontal and vertical
movements..
See diagram in
at next page
-DMX only
-ARTnet only
-ARTnet to DMX