Coemar Infinity Wash M, Instruction Manual

Page: 18 / 29

English
18
8.6 Demo mode
Demo mode allows the fixture to perform up to 4 different demonstration programs Infinity Wash M .
8.7 Special mode and electronic motor alignment
WARNING!
This section is for the exclusive use of qualified and experienced personnel.
SPECIAL MODE menu allows access to the electronic motor alignment section and to special functions, like lamp odometer reset, software upload
and download. To enter SPECIAL MODE reach the reset page in the MAIN FUNCTIONS menu, start reset choosing ALL and press simultaneously
enter and menu buttons for about 10 seconds.
WARNING!
The electronic tuning procedure is only possible when the DMX512 signal is on.
The display panel of
Infinity Wash M allows the electronic motor alignment of the projector motors in the optical system; this procedure is
performed by Coemar at the factory during the testing: in order to obtain particular effects or in the case of internal components being replaced
(motors, electronic boards, sensors, etc.) it may be necessary to change this setting.
Altering the default settings performed by Coemar may radically alter the functioning of the projector. Carefully read all of the following functions
before trying to perform any operations.
Note: pressing the b and – simultaneously the setting returns to 128 (default value).
DEMO
DEMO FULL
DEMO FIX
DEMO COLOURS
DEMO EFFECT
It performs a demonstrative program with all systems active.
It performs a demonstrative program without pan and tilt
movements.
It performs a demonstrative program using only colour
changer.
It performs a demonstrative program including only effects
features.