Coemar ColourCyc 250LX, Instruction Manual

Page: 2 / 30

Index
1.Packaging Pag. 3
2.Transportation ,, 3
3.Important safety information ,, 3
4.Lamp: replacement and substitution ,, 4
5.Operating voltage and frequency ,, 6
6.Installation ,, 6
7.Mains connection ,, 7
8.Signal connection ,, 8
8.1 Automated operation - “solo” ,, 8
8.2 Operation via DMX 512 ,, 8
8.3 Synchronising multiple ColourCyc 250 LXs without using DMX 512 signal ,, 9
9. Powering up ,, 10
10.DMX addressing ,, 11
11.Operating via DMX 512 signal ‘’ 12
12.Dip-switch settings for automated “solo” operations ,, 14
13.Operating multiple ColourCyc 250 LX in the absence of DMX 512 signal ,, 15
13.1 “Master” units ,, 15
13.2 “Slave” units ,, 16
14.Dip-switch functions ,, 17
15.Remote operation via
“dr1”
,, 18
16.Auxiliary led and reset button functions ,, 19
17.Mechanical adjustments ,, 20
17.1 Tilt adjustment ,, 20
17.2 Altering beam angles by inserting diffusion filters ,, 21
18.Opening up the projector ,, 23
19.Altering the operating voltage and frequency ,, 24
19.1 Selecting the operating voltage on the autotransformer ,, 24
19.2 Selecting the operating frequency on the power supply ,, 25
20.Opening the front of the projector ,, 26
21.Thermal protection ,, 28
22.Servo-controlled fans ,, 28
23.Maintenance ,, 28
24.Electronic motor alignment ,, 29
25.Spare parts ,, 30
2
English