2) Open the dimmer/shutter using DMX channel 1 and 2, up to DMX level 255.
3) Insert a colour into the beam of light controlled by DMX 3
4) Adjust the offset (calibration) of the dimmer by utilising control channel DMX 4.
5) Adjust the offset (calibration) of the colour wheel by utilising control channel DMX 5.
6) Check the alignment of the individual colour in the optical path of the projector controlled by channel DMX 3.
7) When the desired offsets have been obtained, press the reset button to record the calibration setting.
To return to normal operation, return the
motor calibration
dip-switch to the
OFF
position.
All the components of the
ColourCyc 250 LX
are available as spare parts from your
coemar
service centre.
Accurate description of the fixture, model number, and type will assist us in providing for your requirements in an efficient and effec-
tive manne
25. Spare parts
ON
ON
1
2
4
8
16
32
64
128
256
motor
calibration
English
30
