background image

O P E R A

T I O N

T

o temporarily turn Off Auto Squelch:

1. 

Press the LIGHT/MAX RANGE button less than five (5)

seconds. 

If you hear two (2) beeps, you have turned the Maximum
Range Extender On (see below).

T

o turn Maximum Range Extender On:

1. 

Press and hold the LIGHT/MAX RANGE button for at

least five (5) seconds until you hear two (2) beeps
which indicates the Maximum Range Extender is On.

T

o turn Maximum Range Extender Off:

1. 

Press and release the LIGHT/MAX RANGE button or

change channels.

Using the Lock Function

The Lock function locks the CHANNEL, MODE and HI/LOW

POWER buttons to prevent accidental operation. 

T

o use the Lock function:

1. 

While in Standby mode, press and hold the LOCK

button for one (1) second. The Lock icon will blink 
when the radio is locked. Buttons that are NOT locked
are the CALL, LOCK, LIGHT/MAX RANGE, TALK buttons,
and ON-OFF/VOLUME switch which are all fully
functional while the radio is locked.

2. 

T

o “unlock” buttons, press and release the LOCK 

button again. The Lock icon disappears and all buttons
will be unlocked.

External Speaker/Microphone Jack

Y

our microTALK

®

radio can be fitted with an external

speaker/microphone, freeing your hands for other tasks.
(See page 16 for optional accessories.)

T

o attach an external speaker/microphone:

1. 

Open the SPKR/MIC tab on top of the radio.

2. 

Inser

t the plug into the SPKR/MIC jack. 

(

CAUTION: 

Do not use an exter

nal speaker/

microphone with common ground circuits with this radio.
Damage can result. We recommend using only Cobra

®

authorized accessories.)

O P E R A

T I O N

ENGLISH

6

Calling Another Person

To alert another person that you are calling:

1. 

Press and release the CALL button. The other person will

hear a two (2) second ringing tone. (See page 11 on
how to select between ten (10) call tone settings.)

You cannot send or receive transmissions during the two
(2) second call tone.

T

alking to Another Person

1. 

Press and hold the T

ALK button.

2. 

W

ith the microphone about two (2) inches (5 cm)

from your mouth, speak in a normal voice.

3. 

Release the button when you’re finished talking and

listen for a response. You cannot receive incoming calls
while pressing the TALK button.

Listening for a Response

When you are finished talking:

1. 

Release the T

ALK button to receive incoming

transmissions. Your microTALK

®

is always in listening

mode while the TALK button is not pressed.

2. 

Adjust the volume by rotating the ON-OFF/VOLUME switch.

Illuminating the Display

1. 

Press and release the LIGHT/MAX RANGE button to

illuminate the display for ten (10) seconds.

Auto Squelch/Maximum Range

Y

our microTALK

®

radio is equipped with Auto Squelch,

which automatically shuts Off weak transmissions and
unwanted noise due to terrain, conditions, or if you’ve 
reached your maximum range limit.
You can temporarily turn Off Auto Squelch or turn On
Maximum Range Extender, allowing all signals to be
received and extending the maximum range of your radio.

ENGLISH

5

T

ALK

Button

LOCK

Button

2 inches away

 

ON/OFF

VOLUME

Switch 

LIGHT/

MAX RANGE

Button

LIGHT/

MAX RANGE

Button

Speaker/

Microphone

Jack

External

Microphone 

Speaker

CALL

Button

Summary of Contents for microTALK PR 945 DX




















Reviews: