COMPLETE INSTRUCTIONS G100-G300
56
Disabled
Enabled
G100 - G300
8.12
•
Automatic anti - theft protection delay with odometer.
If the theft protection function is controlled by a movement sensor (page 5 line 6 active in
the programming tables for the G300; page 4 line 6 active in the programming tables for the
G100), at a speed other than 0, there is a delay of 4 min.; if the vehicle stops this
calculation is suspended. A cyclic sequence of alarms is generated after 4 min. which last
4 min.. Enter the full Pin Code at this point to be recognised.
8.13
•
Pager.
Negative command to control a Pager module.
8.14
•
Anti-diversion block
.
After the system has been disarmed by radiocontrol, if the ignition key is not turned on
within 40 s the block is automatically rearmed.
8.15
•
Anti-diversion alarm.
After the system has been disarmed by radiocontrol, if the ignition is not turned on within
40 s the system is automatically rearmed. If a door or the boot are opened, the count -
down is cancelled.
8.16
•
Buzzer.
The buzzer emits acoustic signals synchronized with the blinking of the direction
lamps when the system is armed/disarmed.
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
