COMPLETE INSTRUCTIONS G100-G300
58
passenger compartment.
9.5 - Bonnet button (G100 - G300).
The installation of this button is indispensable to allow access to the alarm programming
and radiocontrol self - learning procedures.
When installation is completed, check that the button is pressed by the bonnet to the
extent of at least 5 mm. Check that the button does not press on the sound-absorbing
panels or the outer bodywork plate-metal, as these materials could beome dented with
the passing of time.
9.6 - Antenna (G100 - G300).
The correct positioning of the antenna is essential for the proper operation of the
radiocontrol/Driver Card system. The cable must not be cut, rolled up, or connected to
another cable or to the bodywork and must be kept separate from the wiring harness.
Position the antenna so that it is at least 20 mm away from metal parts.
9.7 - Emergency Panel.
To be installed on the dashboard in a position that also ensures that the button can be
reached and the LED can be seen by the user, as in addition to its deterrent function the
panel (LED + button) is used during programming operations and in the user recognition.
10 - VEHICLE SPEED SENSOR CONNECTION - VSS (G100 - G300).
The VSS signal frequency is proportional to the speed of the vehicle (it is normally a
rectangular signal with f max = 4 KHz).
If the activated function requires it, the VSS signal must be connected to the PINK - BLACK
wire of the alarm. In some vehicles, the signal must be taken straight from the combined
instrument. The signal must not be taken from the ABS control system or from control
circuits as this could impair the vehicle’s safety and the way it operates.
11 - AUXILIARY OUTPUT AUX2.
It is the dedicated output for the “Pager” module connection and for the followings
functions:
•
Pager.
•
Trunk Release.
•
Windows lift closing.
•
Automatic doors looking (AMERICAN STYLE).
