background image

         COMPLETE INSTRUCTIONS G100-G300

54

8.6 

Voluntary anti - theft protection.

In this mode the vehicle user voluntarily activates the function by pressing button “B” on
the remote control with the panel switched on.
The activated status is confirmed by fast flashing of the LED. After activation, if a door is
opened the remote controls are no longer recognised, the LED stops flashing and after 4
min. a 4 min. cyclic alarm is generated; to avoid this situation, the alarm sistem must be
recognised the driver card (if self-learned), or must be entred the frist two digits of the Pin
code.The alarm stops when you turn at the OFF position the ignition key and after 25 s the
alarm system and the engine immobiliser will be armed again.

 

In order to  switch off the

system in the theft protection mode, it is necessary to enter the full Pin Code. If a door must
be opened when the function is active (the LED flashes fast), it must firstly be deactivated
by pressing button “B” on the remote control again. The LED flashes once and then
switches off.

When the system goes in alarm, the siren will play for 30 s and the direction indicators will
flash for 4 min.; instead, if the loudspeaker or the horn have been connected, a visual and
acoustic signalling alarm will be emitted for 4 min.

8.7

  •

Speed limit signal.

If activated, the system signals that the speed limit has been exceeded by means of a
buzzer. In order to store the speed limit, press button “A” on the remote control when the
vehicle is travelling at the desired speed. To deactivate the function, press button “A” on
the remote control once whilst the vehicle is moving.

8.8

 

Trunk Release (truck opening)

If the Trunk Release function is activated, with the pressure of both radio control keys to
“A” and “B” one has the trunk opening. This is signalled by a 4 s flashing of the indicator
lights, and the automatic exclusion of the internal and door ultrasound devices, and the
additional modules, too, if they are connected. When the trunk is closed the system
automatically reactivates.

Disabled

Enabled

Disabled

Enabled

Disabled

Enabled

Summary of Contents for G100

















































Reviews: