COBHAM SAILOR 6120, Installation Manual

Page: 84 / 116

Chapter 4: Configuration
72 SSA buttons configuration (SAILOR 6120 only)
4.6.4 Remote SSAS reconfiguration
You can reconfigure your SSA system from a remote location. To define
whether or not you have to push the test button on board to access the
configuration, use the following command:
: se -ab 0
(you can change settings without pushing the test button on board)
: se -ab 1
(you must push and hold the test button for min. 60 seconds before you
can make SSAS configuration changes within 60 minutes after pushing the
button)