COBHAM SAILOR 6120, Installation Manual

Page: 57 / 116

Chapter 3: Connect the system
Connectors and pinout 45
3333
Co
nn
ec
t th
e
sy
st
em
3.5.3 SAILOR 6194 Terminal Control Unit
The drawing below shows the connectors on the SAILOR 6194.
The SAILOR 6194 Terminal Control Unit is used in the SAILOR 6120 SSA
System for connecting SSA buttons, and may also be used in other systems
for connecting additional equipment.
X5 and X6 are standard connectors for RS-232 (9-pin D-sub) and Ethernet
(RJ-45), all other connectors are spring-loaded terminals.
In the SAILOR 6120 SSA System, the following interfaces on the
SAILOR 6194 are used:
• CAN spring-loaded terminals (X2).
Connect to the CAN bus in the mini-C system. This interface is also used
for connecting power.
Note The SAILOR 6194 is only included with the SAILOR 6120 SSA
System, but can be acquired for other systems as well.
X5 X6
X1
X2
X3
X7
X9 X11 X13
X14 X12 X10 X8