COBHAM SAILOR 6120, Installation Manual

Page: 66 / 116

Chapter 4: Configuration
54 Configuration using easyMail
Do as follows:
1. Start the easyMail application.
2. Select
Setup
>
Mobile number
.
3. Type in the mobile number (9 digits) and click
OK
.
You should now see the mobile number in the status field at the top of
the page.
4. Select
Actions
>
Login
and select the Ocean region that matches your
current position.
After a short while you should see the Ocean region just below the
mobile number in the status field at the top of the page. This means you
are now logged on.
5. Select
Setup
>
Default ISP...
6. Choose your Inmarsat Service Provider from the list.
7. Select
Setup
>
Default LES
.
8. Choose the Land Earth Stations of your Inmarsat Service Provider for
each Ocean region.
The system is now ready to send and receive messages.
4.3.4 Enter vessel data
You can enter vessel data that can be used for automatic insertion into your
messages. To enter the data for your vessel, do as follows:
1. In the easyMail application, select
Edit
>
Enter vessel data
.
2. Enter name, type, flag, destination and cargo. You may also add a
comment.
3. Click
OK
.
You can now automatically insert all the above information in your
message by selecting
Insert
>
vessel data
.