COBHAM SAILOR 6120, Installation Manual

Page: 40 / 116

Chapter 3: Connect the system
28 Connect the units
3.1.2 Cables and connectors
To see where the cables (W) and connectors (C) are located, refer to the
drawings on the previous pages. The below table lists the cables and
connectors from the drawings.
Cable Type Included/not included
W1 NMEA 2000 Mini Device Cable Included (30 m) with
SAILOR 6120 and
SAILOR 6130
W2 NMEA 2000 Micro Device Cable Included (6 m) with
SAILOR 6194
W3 NMEA 2000 Mini Device Cable Included (6 m) with all
systems, except
SAILOR 6140
W4 NMEA 2000 Micro Device Cable Included (6 m) with SAILOR
6150 only
W5 Straight through RS-232 serial
cable with 9-pin D-sub connector
(max. 15 m)
Not included, must be
purchased separately
W6 Cat. 5E LAN cables, shielded
(max. 100 m)
Not included, must be
purchased separately
W7 Power cable to SAILOR 6018
Message Terminal Included with the SAILOR
6018
C1 Mini/Micro NMEA 2000 T-
connector Included (1 pcs.) with all
systems, except
SAILOR 6140
C2 Micro NMEA 2000 T-connector Included (1 pcs.) with
SAILOR 6150 only
Table 4: Cables in the system