COBHAM SAILOR 6120, Installation Manual

Page: 73 / 116

Chapter 4: Configuration
Configuration using SAILOR 6018 (only for SAILOR 6150) 61
4444
Configuration
4.4.4 To select the encoding format
When Cyrillic characters are enabled, you can change your keyboard to a
Cyrillic keyboard for use in the message editor.
1. First select the encoding you need. You can do this either
• when you start a new message (
Message
>
New message
)
• from the message editor (
Options
>
New message
)
• from the message editor under the encoding format in the top right
corner, as shown below.
There are currently three encoding formats for Cyrillic characters.
2. After selecting the encoding, touch the screen and then touch the
keyboard symbol that appears in the message editor. To toggle between
Cyrillic and latin characters, touch
[CY]
in the bottom left corner of the
on-screen keyboard.
{