98-175666-A
Appendix F: Event messages
F-13
List of events
0B094-0 APSM
INFO
APSM Main Over
voltage protection
Voltage too high. (!T,!S)
0B0A0-0 APSM
ERROR
APSM
Communication error
No communication with APSM. Check internal
connections in ACM. (!T,!S)
0B0A1-0 APSM
ERROR
BDCM
Communication error
No communication with BDCM. Check main
antenna cable. (!T,!S)
0D000-0 BDCM
WARNING BDU PSU
temperature too high
BDU PSU temperature too high.
0D001-0 BDCM
WARNING BDU PSU fan does
not work
BDU PSU fan does not work.
0D002-0 BDCM
ERROR
BDU PSU will
shutdown
BDU PSU will shutdown.
0D003-0 BDCM
ERROR
BDCM prod data
BDCM prod data is invalid
0E000-0 AIMO
ERROR
AIM-O
Communication
Startup of communication with AIM-O failed.
0E001-0 AIMO
ERROR
AIM-O PLL out of lock PLL out of lock
0E002-0 AIMO
ERROR
AIM-O voltage range Voltage measured at AIM-O is not within expected
range
0E003-0 AIMO
ERROR
AIM-O cal data
AIM-O calibration data is invalid
0F000-0 BIMO
ERROR
BIM-O
Communication
Startup of communication with BIM-O failed.
0F001-0 BIMO
ERROR
BIM-O PLL out of lock PLL out of lock
0F002-0 BIMO
ERROR
BIM-O voltage range Voltage measured at BIM-O is not within expected
range
0F003-0 BIMO
ERROR
BIM-O cal data
BIM-O calibration data is invalid
0F004-0 BIMO
ERROR
VMU reference signal There is no VMU Rx or Tx reference signal. Whether
this is Rx or Tx reference depends on the user's
selection on the modem profile page in the web
interface. Make sure the VMU Rx/Tx cable is
connected and that the VMU is configured to
output the RX/TX reference signal.
0F005-0 BIMO
WARNING No BIMO Master PLL BIMO Master PLL out of lock
0F006-0 BIMO
WARNING No BIMO LO PLL
BIMO LO PLL out of lock
ID
Module Type
Description
Explanation
Table F-1: Event messages (Continued)
