9932EMDE-OM (V1.4)
9932-EMDE PRODUCT MANUAL
3-15
Operating Instructions
9932-EMDE Function Menu List and Descriptions
(continued)
• Frame Delay Control
Minimum Latency Frames Control
When Framesync is enabled, specifies the smallest amount of latency
delay (frames held in buffer) allowed by the frame sync. The frame sync
will not output a frame unless the specified number of frames are
captured in the buffer. The operational latency of the frame sync is
always between the specified minimum latency and minimum
latency plus one frame (not one field).
Note: Due to card memory limits, the maximum available Minimum
Latency Frames is related to the output video format selected.
When using this control, be sure to check the Report Delay
display to make certain desired amount of frames are delayed.
• Video Delay Display
Displays the current input-to-output video delay (in msec units) as well as
in terms of Frames/fractional frame (in number of lines).
• Framesync Lock Status Display
Displays the current framesync status and reference source.
Note:
Audio timing offset from video is performed using the delay controls on the Input Audio Routing/Controls tab. Refer to
Input Audio Routing/Controls (p. 3-17) for these controls.
Table 3-2
9932-EMDE Function Menu List — continued
Status display shows total input-to-output video delay, along
with any framesync delay.