manualshive.com logo in svg

Cobalt Digital Inc 9922-FS, Product Manual, Page: 83 / 118

Share
Download
Cobalt Digital Inc 9922-FS Product Manual Download Page 83

9922FS-OM (V1.5)

9922-FS PRODUCT MANUAL

3-41

Operating Instructions

9922-FS Function Menu List and Descriptions

Provides user-configurable burn-in of up to two text 
strings and timecode on output video.

Character Burner

Note: Ident 1 and Ident 2 sub-tabs provide identical, independent controls for inserting two independent text (identification) 

burn-in overlays on the output video. Ident 2 has controls identical to the controls described here for Ident 1. Therefore, 
only the Ident 1 controls are shown here.

• Ident Insertion Controls

Selects the rules for identification text burn-in overlay insertion into output 
video.

Note: Enable on Loss of Video setting is valid only for card licensed with 

+FS Framesync Option. If ident text insertion is desired for input 
LOS conditions, the Framesync On Loss of Video control must be 
set to provide a raster (from one of the choices shown) to support 
the text insertion. 

If this control is set to “Disable Outputs”, no raster or text insertion 

will be present on the output video under input LOS conditions. 
See Framesync (p. 3-21) for more information.

• Display Type (Format) Select

Selects the type of data to be displayed as burn-in text from choices 
shown.

• User text allows user text to be entered using field described below.

• Video type inserts an overlay showing the video format of the input 

being used for processing.

• Display (Ident) Text Entry Field

Dialog entry box that allows entry of desired ident text string. Enter 
desired text as click Update when done to input the text string.

Note: • All normal keyboard alphanumeric characters are supported, in 

addition to ASCII characters (Windows ALT+nnnn).

• Up to 126 characters can be entered.

• Ident Text Attributes Controls

Sets burn-in size/position attributes as follows:

• Character Size sets character size (in pixels).

• Text Justification selects from left, right, or center-aligned justification 

within the text box overlay. 

• Character Color selects text color. 

• Character Opacity sets text opacity from 0% (least opacity) to 100% 

(full opacity).

• Ident Text Background Attributes Controls

Provides independent controls for setting the color and opacity of the 
burn-in text and its background.

• Color drop-down sets background color from multiple choices.

• Opacity control sets background opacity from 0% (least opacity) to 

100% (full opacity).

Table 3-2

9922-FS Function Menu List — continued

Summary of Contents for 9922-FS























































































































Reviews:

No comments