manualshive.com logo in svg

Cobalt Digital Inc 9922-FS, Product Manual, Page: 61 / 118

Share
Download
Cobalt Digital Inc 9922-FS Product Manual Download Page 61

9922FS-OM (V1.5)

9922-FS PRODUCT MANUAL

3-19

Operating Instructions

9922-FS Function Menu List and Descriptions

(continued)

• Center Cross Controls

• Center Cross provides enable/disable of center cross insertion.

• Cross Height and Width control height of vertical line and width of 

horizontal line (from 0% to 100% of 4:3 outputted image area).

• Horizontal Line Controls

• Horizontal Line provides enable/disable of horizontal line insertion.

• Horizontal Line Size controls the width of the horizontal line (from 0% 

to 100% of 4:3 outputted image area).

• Horizontal Line Pos controls the vertical positioning of the horizontal 

line (from 0% to 100% of 4:3 outputted image area).

• Vertical Line Controls

• Vertical Line provides enable/disable of vertical line insertion.

• Vertical Line Size controls the height of the vertical line (from 0% to 

100% of 4:3 outputted image area).

• Vertical Line Pos controls the horizontal positioning of the line (from 

0% to 100% of 4:3 outputted image area).

• NTSC Legacy Reticule Fixed Control

When set to enable, provides fixed-size safe action area 4:3 reticule 
suited for CRT-based displays.

Table 3-2

9922-FS Function Menu List — continued

Summary of Contents for 9922-FS























































































































Reviews:

No comments