Cobalt Digital Inc 9922-FS, Product Manual, Page: 107 / 118

9922FS-OM (V1.5) 9922-FS PRODUCT MANUAL
3-65
Operating Instructions
9922-FS Function Menu List and Descriptions
(continued)
• Card Network Setup Controls Note: • The IP address setting here is independent of a frame IP typically
used for DashBoard or other frame/card remote control.
• The IP address setting here is required if the card Ancillary Data
Proc Controls function is to send or receive data via IP. If IP
comm with Ancillary Data Proc Controls is not required, setting
these fields can be ignored. See Ancillary Data Proc Controls (p.
3-52) for more information.
• Addressing Mode allows setting address to static (user) address or
via DHCP (where a DHCP server is available for the connection).
• Static IP Address, Static Subnet Mask, and Static Default
Gateway fields allow setting IP parameters when Static mode is
selected.
• Card Active IP shows the currently configured IP address (whether
static or DHCP).
• Card Check and Restore Utilities Memory Test allows all cells of the card FPGA memory to be tested.
This control should only be activated under direction of
product support. Exercising the memory test is not part of
normal card maintenance.
Restore from SD Card allows card rendered inoperable to be restored
using an SD memory card fitted to the card internal SD slot.
Product support must be contacted prior to performing this
operation. Use of any SD card not supplied by support can
corrupt the card.
• NTP Clock Setup Allows device NTP clock IP source and localization. This is the clock/time
device will use for logs and other recorded actions.
• NTP IP sets the IP address where NTP is to be obtained.
• Local Timezone sets the recorded time to the localized time.
• NTP Status shows if time is synced with NTP or if an error exists.
User Log
Automatically maintains a log of user actions and input
lock status.
Table 3-2 9922-FS Function Menu List — continued
User Log shows input lock and other user conditions (with most
recent event at top of list).
Clear User Log clears all entries.
Download Log File opens a browser allowing the log file to be
saved on the host machine.