O P E R A T I N G M A N U A L
8 0 0 . 7 4 9 . 2 7 6 1
w w w . c o a c h c o m m . c o m
1 2
A/B and C/D Channel Ports
There are six (6) access ports for channels A/B and C/D on the front of the WI. These ports are for connecting Wired
BeltPacks via a Cat 5 (RJ-45) connection. When connected to these ports, Wired BeltPack can communicate with any
wireless user subscribed to the same channel (also referred to as a conference within X-Ware).
The WI is connected to the Control Unit within the 2RU press box case via four short XLR cables. Figure 13 below shows a
diagram of this connection.
Default Conferences
An X-System conference is a conversation between a set group of coaches. By default, each X-System will include four
conferences. These four conferences are the only ones accessible to coaches using Wired BeltPacks in the booth.
Wired Interface (WI) Power
There is no power switch on the WI. The power to the WI comes on when it is plugged into an AC
wall outlet. The green “Power” LED on the front of the WI indicates whether power is on or off. The
AC power goes through a DC power supply and then into the “DC IN” of the WI.
Figure 13: Control Unit and Wired Interface Connection
Table 1: Default Conferences
Wired Port
X-System Default
Short Name
A
Primary Offense
Pri O
B
Secondary Offense
Sec O
C
Primary Defense
Pri DEF
D
Secondary Defense
Sec DEF
Figure 14: Wired Interface Power LED
