Operating Instructions
RaptorX-SL-Series
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 62
Support: +49 (0)2831/91021-50
06.10.2010
6 . 2 . 2
Adjusting Ta ble To p
The table top (optional) must be sized according to the clamping
area of the machine.
Raptor X-
SL Series
Maximum length
of table top in mm
Maximum width of
table top in mm
S-1200/S15
1500
1700
S-1200/S20
1500
2200
S-2200/S15
2500
1700
S-2200/S20
2500
2200
S-3200/S15
3500
1700
S-3200/S20
3500
2200
Fig. 26: table top support struts may
be installed on 4 different heights
The open frame allows for the adjustment of the height of the
worktop support to be increased from 50mm to 850mm.
The work table will be placed on top of the table top support
struts (Fig. 26) at whichever particular height is chosen.
This will allow the bridge height to clear either
50/150/300/400mm.
When the table support struts are removed completely large
work pieces may be mounted on the floor up to a maximum
height of 850mm however with restriction in X-axis movement.
Staff:
Qualified staff
Safety equipment:
Protective clothing
Safety shoes
Safety helmet