65
`
NOTE!
To apply the same settings to other days in a week, select the desired days right to
Copy To
.
5.
Click
Apply
to save the settings.
NOTE!
To apply the same settings to other cameras, click
right to
Copy
, select the desired cameras and
then click
OK
.
11
Array Configuration
NOTE!
Only some NVR models support RAID.
Currently only RAID 1 and RAID 5 are supported. You need two hard disks for RAID 1, and 3-8 disks
for RAID5.
Enabling RAID
You need to enable RAID first.
1.
Click
Menu
>
Storage
>
Array
.
2.
Select the check box to enable RAID. A confirmation message appears. Click
Yes
.
Creating an Array
It is recommended to configure a hot spare disk to ensure reliable system operation and successful
rebuilding in case an array fails.
1.
Click
Menu
>
Storage
>
Array > Physical Disk
.
2.
To create an array automatically, click
One-click Create
.
NOTE!
There is no need to select disks when creating an array with
One-click Create
. The system identifies
all usable disks. RAID 1 is created when two disks are available. When three or more disks are
available, RAID 5 is created. If more than four disks are available, a global hot spare disk will be
created.
Arrays created in this way are named ARRAYX, for example, ARRAY1, ARRAY2.
