26
2.
Select a preset from the drop-down list, set the duration (time the camera stays at the preset,
unit: second), and then set the rotation speed (1: slowest, 9: fastest). Click
OK
to save the
settings. The preset is added as a keypoint, as shown in the figure below.
3.
Repeat the above steps to add all presets (keypoints), and adjust the sequence of these presets
by clicking
or
. Modify or delete a preset by clicking or . Clicking will
delete all the added keypoints.
4.
After completing the configuration, click
Apply
to save the settings. Now keypoints for preset
patrol 1 is complete.
5.
Click
right to the drop-down list to start preset patrol 1. To stop, click
.
NOTE!
The duration ranges from 0 to 1800 seconds (default: 10). The rotation speed ranges from 1 to 9
levels (default: 5).
Setting a Recorded Patrol
Record a patrol, including the patrol route, the time that the camera stays at a certain direction,
rotation speed, zoom, focus and focus.
1.
Select a recorded patrol from the drop-down list, for example, Recorded Patrol 1.
2.
Click
to start recording. Steer the camera to the desired directions, adjust the zoom, focus,
iris as needed during the process.
