32
Motion Detection Snapshot
Motion detection snapshot is similar to motion detection recording. You need to enable and
configure motion detection alarm first (see steps 1 to 3 in
Motion Detection Recording
for details),
and then proceed with the following steps.
1.
Set motion detection snapshot: click
right to
Trigger Actions
. In the window displayed, click
the
Snapshot
tab, select the desired camera, and then click
OK
.
2.
Set a snapshot schedule under
Menu
>
Storage
>
Snapshot
. For the detailed steps, see
Scheduled Recording
. Make sure
Type
is set to
Motion
.
Alarm Triggered Recording and Snapshot
Set input alarms to trigger recording and snapshot.
Alarm Triggered Recording
1.
Click
Menu
>
Alarm > Input/Output
>
Alarm Input
.
2.
Set alarm input: click
for the desired camera. In the window displayed, select
Enable
, select
N.O. (normally open) or N.C. (normally closed) for trigger mode, and then click
OK
.
