manualshive.com logo in svg

cmotion cPRO hand unit, User Manual, Page: 61 / 80

Share
Download
cmotion cPRO hand unit User Manual Download Page 61

All content © 2018, cmotion GmbH. All specifications are subject to change without further notice.

http://www.cmotion.eu

page 61 of 80

6.2.3.6.  BUTTONS

The buttons menu allows you to assign user functions to any assignable user button on 

the cPRO hand unit. Once a user function is assigned to a button, the button will illuminate 

and the buttons assignment will be displayed in the buttons main screens. If the button is 

assigned to no function (off) the corresponding user button will not be illuminated.

Note: With the exception of of the REC button, the HOME button and the menu button 2 

(MB2) all other buttons can be assigned individually. All buttons, with the exception of the 

back button, illuminate once assigned to a user function.

6.2.3.6.1. 

Assignable user buttons

Assignable user buttons

User button functions

UB1
UB2
UB3
BB1
MB1
MB3

Off
Focus limits set
Iris limits set
Zoom limits set
Focus calibration
Iris calibration
Zoom calibration
Calibration all
ZAP
Joystick speed up
Joystick speed down
Autofocus press
Autofocus toggle
Autofocus pinpoint
System unit
Steath mode
Laser pointer
Camera rec
Lock knob
Lock slider
Lock joystick
Lock thumb wheel

Summary of Contents for cPRO hand unit

















































































Reviews:

No comments