manualshive.com logo in svg

cmotion cPRO hand unit, User Manual, Page: 56 / 80

Share
Download
cmotion cPRO hand unit User Manual Download Page 56

All content © 2018, cmotion GmbH. All specifications are subject to change without further notice.

http://www.cmotion.eu

page 56 of 80

6.2.3.4.  MOTORS

The motors menu contains all settings related to motor functions. These consist of:

Calibration all

Motor settings

Stealth mode

6.2.3.4.1. 

Calibration all

The calibration all menu allows you to calibrate all motors at once. Selecting calibration all 

will calibrate all connected motors without further confirmation required.

NOTICE

The lens motors must be recalibrated under the following conditions:

- When a motor is detached from the lens

- After changing motors

- After changing lenses

- After a change in a motor position while powered down

NOTICE

Omitting motor calibration might lead to damage of the lens due to the high level of motor 

torque!

CAUTION!

Risk of injury!  Do not touch the motor gear while motor is powered up!
This device is not intended for use by children. Keep body parts out of the motion path.

Disconnect the plug if the device is not used for a longer period of time.
IEC 60417-6056 (2011-05) for other moving parts

Summary of Contents for cPRO hand unit

















































































Reviews:

No comments