All content © 2018, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 57 of 80
6.2.3.4.2.
Motor settings
The motor settings menu contains all settings related to motor behaviour. Once you have
entered the motor settings menu, please select the motor you want to adjust from the
dynamic motor list.
Each motor menu consists of:
Axis (status)
Direction (status)
Ramp (status)
Torque (status)
Calibrate
6.2.3.4.2.1. Axis
The axis menu allows you to change the motor assigment to focus, iris or zoom.
Note: The axis menu changes the motor assignment not the assignemnt of the control
interface. With cforce motors you can change the motor assignment on the motor itself by
pressing the FIZ button. In order to change the motor assignement for a cPRO motor, please
refer to the cPRO motor user guide.
6.2.3.4.2.2. Torque
The torque menu allows you to adjust the strength of the motor to min, weak, strong and
max.
Note: Increasing the motor torque drains more power of the system and can place stress
on the lens. Only increase the torque as much is necessary, in order to achieve reactive and
fluent lens control.
6.2.3.4.2.3. Direction
The direction menu allows you to set the side of the camera which the lens motor is
mounted on to either left or right.
Note: The direction is defined from the operators point of view, from behind the camera.