manualshive.com logo in svg

cmotion cPRO hand unit, User Manual, Page: 22 / 80

Share
Download
cmotion cPRO hand unit User Manual Download Page 22

All content © 2018, cmotion GmbH. All specifications are subject to change without further notice.

http://www.cmotion.eu

page 22 of 80

LED status

Meaning

solid green

radio turned on and device connected 

wireless / radio off and device connected 

through the LBUS port (hard-wired)

solid red

initialising state / hardware error

red / green flashing

radio turned on and device not connected 

wireless / radio turned off and device not 

connected through the LBUS port (hard-

wired) 

red flashing

battery low / no free RF channel available

5.2.6. 

Touch screen

 

1  

Capacitive touch display

The cPRO hand unit features a multicolor 1.22” QVGA capacitive TFT touch display.

NAVIGATION

Touch screen gesture

Function

in main screens

swipe left / swipe right

switch between the main 

screens horizontally

swipe up / swipe down

switch between the main 

screens vertically 

tap short twice

enter the adjustment menu

tap and hold

enter  related  adjustment 

menu

in adjustment menu

swipe up

navigate down 

swipe down

navigate up

swipe left / tap short

enter sub menu (select)

swipe right

leave sub menu (back)

1

Summary of Contents for cPRO hand unit

















































































Reviews:

No comments