All content © 2018, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 40 of 80
6.2.3.2.1.4. Lock
The lock menu allows you to lock the knob (e.g. if shooting with a locked off camera).
A small red lock will be displayed in the status bar on all main screens. The letter “K” for
knob will illuminate each time you turn the knob. The knob illumination will start flashing
red, indicating that the knob is locked and no motor control is possible.
6.2.3.2.2.
Slider
The slider menu contains all settings related to the slider control interface and consists of:
Control (status)
Pre-marked strips
Lock (status)
6.2.3.2.2.1. Control
The control menu allows you to assign the axis you want to control (Focus / Iris / Zoom)
to the slider. If you select Off, the slider will have no control over any axis and will turn its
marker strip illumination and status LEDs off.
6.2.3.2.2.2. Pre-marked strips
The pre-marked strips menu allows you to select one of three pre-marked iris strips. Each
strip is engraved with a scale from close or 22 to one of 3 open iris values. Pre-marked
iris strips can be used with a wide range of lenses and save time marking an iris strip for
each lens.
Pre-marked iris strips are available with the following T-stop scales:
close - 1.0
22 - 2.0
22 - 2.8
Note: Before pre-marked iris strips can be used, a lens file needs to be created using the
cPRO hand unit´s internal ‘create lens’ feature or a cworld.