Club Car Precedent 2014, Maintenance And Service Manual

Page: 390 / 548

24
Unitized Transaxle Installation UNITIZED TRANSAXLE (GASOLINE VEHICLE)
2644
Figure 24-55 Impulse Line
561
Figure 24-56 Air Intake Hose
27. Connect carburetor vent tube to carburetor and secure with hose clamp (Figure 24-57, Page 24-22) .
847
Figure 24-57 Carburetor Vent Tube
28. Install transaxle drain plug and tighten to 21 ft·lb (28.5 N·m).
29. Fill transaxle with 27 oz (0.8 L) 80-90 Wt. API class GL-3 or 80-90 WT. AGMA class EP gear lube. Install and
tighten the level indicator hole plug to 21 ft·lb (28.5 N·m).
30. Ensure that all wiring is secured properly. See following WARNING.
WARNING
• If wires are removed or replaced make sure wiring and wiring harness is properly routed and secured
to vehicle frame. Failure to properly route and secure wiring could result in vehicle malfunction,
property damage or personal injury.
31. Connect battery and spark plug wire(s). See Connecting the Battery – Gasoline Vehicles on page 1-4.
32. Turn the fuel shut-off valve on top of the fuel tank to the open position (Figure 22-13, Page 22-21) .
33. Place the Forward/Reverse handle in the NEUTRAL position, chock the wheels, and the neutral lockout cam in
the MAINTENANCE position. See following DANGER.
Page 24-22 2014 Precedent ® Golf Car Maintenance and Service Manual