Climax FF5300, Operating Manual

Page: 33 / 86

P/N 91025, Rev. 4 Page 21
3 SETUP
IN THIS CHAPTER:
3.1 R
ECEIPT AND INSPECTION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -21
3.2 P
REPARING THE MACHINE FOR USE
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -22
3.2.1 P
RE
-
SETUP CHECK
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -22
3.2.2 A
SSESSING THE WORK AREA
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -22
3.3 L
IFTING AND RIGGING
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -22
3.4 I
NSTALLATION HAZARDS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -23
3.5 C
ONFIGURING THE
ID
CHUCK
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -25
3.6 I
NSTALLING THE
ID
CHUCK
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -28
3.7 I
NSTALLING THE MACHINE TO THE CHUCK
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -28
3.8 I
NSTALLING THE MACHINING ARM
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -29
3.9 I
NSTALLING THE COUNTERWEIGHT ARM
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -30
3.10 C
ENTERING AND LEVELING THE MACHINE TO THE WORKPIECE
- - - - - - - - - - - - - - - - - - - - -33
3.11 R
OTATING THE TOOL HEAD
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -34
3.12 I
NSTALLING THE CUTTING TOOL AND ADJUST POSITION
- - - - - - - - - - - - - - - - - - - - - - - - -36
3.13 A
DJUSTING THE FEED DIRECTION
,
AXIS
,
AND AMOUNT
- - - - - - - - - - - - - - - - - - - - - - - - -37
3.14 C
ONNECTING THE AIR MOTOR TO THE MAIN BODY
,
THE
PCU,
AND AIR SOURCE
- - - - - - - - - - - - -39
This section describes the setup and assembly procedures for the FF5300 flange
facer.
3.1 R
ECEIPT AND INSPECTION
Your CLIMAX product was inspected and tested prior to shipment, and packaged
for normal shipment conditions. CLIMAX does not guarantee the condition of
your machine upon delivery.
When you receive your CLIMAX product, perform the following receipt checks:
1. Inspect the shipping containers for damage.
2. Check the contents of the shipping containers against the included invoice
to make sure that all components have been shipped.
3. Inspect all components for damage.
Contact CLIMAX immediately to report damaged or missing components.
NOTICE
Keep the shipping container and all packing materials for future storage
and shipping of the machine.
The machine ships from CLIMAX with a heavy coating of LPS 3. The recom-
mended cleaner is LPS PreSolve Orange Degreaser. All parts must be cleaned
before use.