35
© 2008 Directed Electronics. All rights reserved.
After entering the setup mode on the remotes, use the following learn routine to
add remote controls to the system.
If the siren generates one long chirp when attempting to program the unit, the
learn routine is locked and must be unlocked using the Bitwriter® before pro-
ceeding.
The Valet/Program switch, plugged into the blue port, is used for programming.
There is a basic sequence to remember whenever programming this unit: Door,
Key, Choose, Transmit and Release.
1. Open a door. (The GREEN wire, H1/8, or the VIOLET,
H1/6 must be connected.
2. Insert the key. Turn the ignition to the ON position. The
heavy gauge pink wire must be connected.
2. Radious will be if not specified.
1. Texture is same as
3. Body color :
INJECT TOLERANCE SPEC.
*Tolerance please refer specification
of tolerance limits "c"
120~300
DIMENSION
30~120
UNDER 6
0.40
0.80
0.20
0.10
0.08
A
±
GRADE
6~30
B
±
0.40
0.20
0.16
2.00
C
±
0.40
0.80
0.30
DEI
NUTEK
FELIX
VICTOR
APPD BY
UNIT:
M/M
CODE
MATERIAL
FINISH
SCALE:
1:1
YGF
SHEET
DRN BY
CHK BY
11/20/07
OF
DATE
A4
TITLE
DEPT
SIZE
REV.
1
REVISIONS
DESCRIPTION
CORPORATION
OLED IVU
94I0600
DRAWING NO
0
REV
DATE
DRN.
94I0600
CASE P/N:IADGH0A1
KEY P/N:IKDEL0A0
36.32
11.50
10.44
%2'<0$7(5,$/+,+($7$%689
%/$&.
3. Choose. Within 10 seconds, press and release the
Program switch corresponding to the number of the
desired function step listed in the following table.
Once you have selected the function step, press the switch once more and hold
it. The LED flashes and the siren chirps to confirm the selected functional step. Do
not release the Program switch.
Step
Function
1
Auto Learn Standard Configuration* (default)
The auto learn configuration automatically sets up the remote's button con-
figuration.
Note:
Due to the Supercode protocol, you cannot change the configuration.
