CLiC-iT 89 User Instruction Download Page 11

11

must either be fixed to the harness attachment point or be connected to the lanyards, 

avoiding that the two lanyards be tensioned in the event of a fall.

In this case, the difference between the two anchor point must be 20 cm minimum.

Life safety systems should limit a user's fall to less than 50 cm (20 inches). 

According to the lifeline height & to the size of the participant, we propose following 

recommendations: 

Install the central point of the lanyard below the neck 

                 OR

Install the central point of the lanyard above the neck

Details : see point 4.1 

Handles are recommended on all the game to eliminate the need for users to grab the 

lanyards. Lifelines should be installed to minimize obstruction of a user’s head, for 

example on the side.

Choosing PPE

It is recommended that the central point of CLiC-iT lanyard be attached with the shortest 

possible distance to the user’s harness clip-in point. A low clip-in point of the lanyard on 

the harness is strongly recommended to decrease the risk of neck entrapment.

It must be considered that helmets may make it more difficult to extricate one’s head 

from between the lanyard legs. 

Fitting of PPE to the participant 

The correct harness and lanyard length must be chosen individually to fit each partici-

pant correctly.

Harness must be put on properly and double checked.

Adjustments to the harness leg loops are necessary to prevent the harness clip-in point 

from sliding upwards in the case of a fall. This harness rise should be taken into consi-

deration and planned for.

The user should be instructed on proper harness fit and to ask a guide if something feels 

wrong. It should be forbidden for participants to put on the harness on their own. 

Training of the staff 

All staff members must be aware of their responsibilities in order to establish a safe 

environment. They must be properly trained in assist and rescue techniques as well as in 

briefing and coaching methods. 

All staff must receive professional training regularly in which all information for the 

proper operation of the park is conveyed. 

Assessments of the staffs ability to perform competent rescue procedures and conduct 

proper and complete guest briefings must be done on a regular basis. 

The Awareness of all involved risks throughout the park must be raised within your 

instructor and rescue team. The staff must know all possible dangers associated with 

using life safety systems and how different components interact with each other. 

A helpful and supportive attitude towards the guests is important.

Briefing 

The instructions must be passed on to each user on how to use all the equipment and 

practice handling it on the ground before climbing. Awareness of all risks must be 

raised. The user must be informed to refrain from placing his/her head between the 

lanyard legs.

The user should be encouraged to push the lanyard forward him/her on the cable so 

that the lanyard stays in the front of the body and the user's head remains away from 

lanyards. 

Carabiners should only be attached to the designated lifelines. 

Supervision 

The staff team must be vigilant, have taken part in the training process and is required to 

have experience in supervising the course.

Good supervision covering all parts of the course must be ensured.

The rescue team must be prepared and capable of reacting quickly in case of emergency 

and have good and fast access to all parts of the course. All instructors should carry a 

system or device for lifting, not just rescuers or rescue teams.

Participants who faced difficulties during the briefing must be given additional attention 

and helped, verbally or physically, if needed.

Participants should not be left alone on a course.

Enhanced supervision must be in place where the participants are faced with special 

circumstances (zipline, Tarzan swing, etc). 

Please note

The list of recommendations stated here above is only to be used as a general guideline 

to limit the risks involved with climbing in adventure parks. This guideline is by no 

means exhaustive. It should be taken into consideration and validated by park builders 

and operators and shall continuously be expanded in accordance with feedback and 

experiences. 

It is the responsibility of all involved parties to minimize the inherent risks involved with 

climbing and using personal protective equipment, including but not limited to following 

all instructions and guidelines, ensuring a safe park design, a thorough briefing for users, 

the compatibility between all products, the correct use of the safety equipment and by 

providing appropriate training and sufficient qualified staff and life safety personnel to 

oversee the operation (this list is not exhaustive with the practice of the ropes course). 

Summary of Contents for 89


















Reviews: