Clevo N850HJ1 User Manual Download

Page: 211 / 312

Troubleshooting

Problems and Possible Solutions 7 - 9

No image appears on the

external

monitor

I have plugged in and powered

on.

You haven’t installed the video driver and configured it appropriately from the

Control Panel

See

Appendix C

for instructions on installing and configuring

the video driver.

Nothing appears

on screen.

The system is in a power saving mode

. Toggle the sleep/resume key

combination,

Fn + F12

(see

“Configuring the Power Buttons” on page 3 - 9

The screen controls need to be adjusted.

Toggle the screen control key

combinations

Fn + F8/F9

. If you’re connected to an external monitor, make sure

it’s plugged in and turned on. You should also check the monitor’s own
brightness and contrast controls.

The computer is set for a different display.

Toggle the screen display key

combination,

Fn + F7

. If an external monitor is connected, turn it on.

The

screen saver

is activated.

Press any key or touch the

TouchPad

You forget the

boot password

If you forget the password, you may have to discharge the battery of the CMOS.

Contact your service representative for help.

Problem

Possible Cause - Solution



Password Warning

If you choose to set a boot password,

NEVER

forget your password. The consequences of this could be serious. If you cannot

remember your boot password you must contact your vendor and you may lose all of the information on your hard disk.

Summary of Contents for N850HJ1

























































































































































































































































































































Search results

Summary of Contents for N850HJ1

Reviews:

Related manuals for N850HJ1

Brands by name

Popular brands

Clevo N850HJ1, User Manual

Search results

Summary of Contents for N850HJ1

Reviews:

Related manuals for N850HJ1

Brands by name

Popular brands