Clevo N850HJ1 User Manual Download

Page: 254 / 312

Control Center & Flexikey®

B - 30 Mouse Settings - Express Text

Click in

Send

key if required (the

Send

key is the key used to in your target program to send a text message e.g

the Enter key would be the most commonly used), or you can leave it blank if you prefer.

The mouse button click will now be configured to send the text message in the target program under your
chosen Profile, and the button will appear in

blue

If you want to remove any

Express Text

mouse button, select it and click on

Restore

Click

Save

to save the settings within your chosen profile.

Summary of Contents for N850HJ1

























































































































































































































































































































Search results

Summary of Contents for N850HJ1

Reviews:

Related manuals for N850HJ1

Brands by name

Popular brands

Clevo N850HJ1, User Manual

Search results

Summary of Contents for N850HJ1

Reviews:

Related manuals for N850HJ1

Brands by name

Popular brands