Clevo N850HJ1 User Manual Download

Page: 167 / 312

Modules

Intel® Rapid Storage Technology 6 - 19

Intel

Rapid Storage Technology

The

Intel® Rapid Storage Technology

driver supports your AHCI mode SATA

drive, or your

Intel® Optane™

system. Install the

Intel Rapid Storage Technolo-

gy application

(after installing all necessary drivers in the correct order) to support

your

Optane

system or SATA drive if set up in

AHCI mode

in the BIOS (see

“SA-

TA Mode (Advanced Menu)” on page 5 - 11

IRST Driver Installation

Insert the

Device Drivers & Uti User’s Manual

disc into an attached

DVD drive.

2. Click

Option Drivers

(button).

3. Click

3.Install IRST Driver

> Yes

4. Click

Next > Next

5. Click in the check box to accept the license and click

Next

6. Click

Next > Next > Next

7. Click

Finish

to restart the computer.

8. Run the

Intel® Rapid Storage Technology

app from the

Apps

screen.

After setting the SATA mode to

Intel® Optane™ and installing the Intel® Rapid

Storage Technology

application, DO NOT uninstall the

Intel® Rapid Storage

Technology

application.



IRST and M.2 PCI-e

SSDs

Note that Intel® Rapid
Storage Technology

does not support M.2
SSDs with a

PCI-e In-

terface

(M.2 SSDs with

a SATA Interface are
supported).

Summary of Contents for N850HJ1

























































































































































































































































































































Search results

Summary of Contents for N850HJ1

Reviews:

Related manuals for N850HJ1

Brands by name

Popular brands

Clevo N850HJ1, User Manual

Search results

Summary of Contents for N850HJ1

Reviews:

Related manuals for N850HJ1

Brands by name

Popular brands