Clevo N1X0SD User Manual Download Page 147

Page: 147 / 336

Modules

Overview 6 - 1

Chapter 6: Modules

Overview

This chapter contains the information on the various modules (some of which are

optional

) which may come with your computer, depending on the configuration

purchased. If you are unsure please contact your service representative.

The chapter includes information on the following:

• PC Camera Module
• Wireless LAN Module
• Fingerprint Reader Module
• Bluetooth & WLAN Combo Module
• Intel® Rapid Storage Technology
• Intel® Rapid Start Technology Driver
• Sound Blaster Cinema 2
• Trusted Platform Module
• 3G/4G Module
• Wireless Display

Note that the information on the following pages is for

Windows 8.1 (64-bit) only

For

Windows 10

driver installation see

“Windows 10 Drivers & Utilities” on page E

- 15

Summary of Contents for N1X0SD

















































































































































































































































































































































Search results

Summary of Contents for N1X0SD

Reviews:

Clevo N1X0SD, User Manual, Page: 147 / 336

Search results

Summary of Contents for N1X0SD

Reviews: