Clevo N1X0SD, User Manual, Page: 198 / 336

Modules
6 - 52 3G/4G Module
6
3G/4G Module
( For Model A & B Computers Only )
If you have included an optional UMTS/HSPA+ based 3G Module (Universal Mo-
bile Telecommunications System or High Speed Packet Access) module or LTE
(Long Term Evolution) 4G module (see “Communication” on page D - 4 for spec-
ification details) in your purchase option, you do not require a driver/application
installation for Windows 8.1 . Follow the instructions overleaf to install the USIM
card (which will be provided by your service provider), and then use the Charms
Bar Wireless icon to access the 3G/4G network in the same manner as the WLAN
(see page 6 - 54 ).

Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission
devices aboard aircraft
is usually prohibited.
Make sure the
WLAN,
Bluetooth and 3G/4G
module(s) are OFF
(or
the system is in Air-
plane Mode ) if you are
using the computer
aboard aircraft (see
Table 1 - 4, on page 1 -
16
).

Important Notice
If your purchase option includes both Wireless LAN and 3G/4G modules, then the appro-
priate antennas will be installed. Note that In order to comply with FCC RF exposure com-
pliance requirements, the antenna must not be co-located or operate in conjunction with
any other antenna or transmitter.
Important Notice - 3G/4G & Bluetooth/Wireless LAN Modules
In order to comply with FCC regulations you should NOT operate the 3G/4G module and
the Bluetooth/Wireless LAN modules at the same time as this may disrupt radio frequency,
and cause interference. When the 3G/4G module is powered on, make sure that the Blue-
tooth/Wireless LAN modules are powered off.