manualshive.com logo in svg

Clevo N1X0SD, User Manual

Share
Download
Clevo N1X0SD User Manual Download Page 173

Modules

Intel® Rapid Storage Technology 6 - 27

6

Intel

®

 Rapid Storage Technology

Install the 

Intel® Rapid Storage Technology

 to support your AHCI mode SATA

drive.

IRST Driver Installation

1.

Insert the 

Device Drivers & Uti User’s Manual 

disc into an attached 

DVD drive.

2. Click 

Option Drivers

 (button).

3. Click 

4.Install IRST Driver

 

> Yes

.

4. Click 

Next

.

5.

Click the check box to accept the license and click

 Next

.

6. Click 

Next

 

> Next > Next

.

7. Click 

Finish

 to restart the computer.

8. Run the 

Intel® Rapid Storage Technology

 app from the 

Apps

 screen.

IRST and M.2 PCI-e 

SSDs

Note that Intel® Rapid
Storage Technology

does not support M.2
SSDs with a

 

PCI-e Inter-

face

 (M.2 SSDs with a

SATA Interface are sup-
ported).

Summary of Contents for N1X0SD

















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands