manualshive.com logo in svg

Clevo N1X0SD, User Manual, Page: 259 / 336

Share
Download
Clevo N1X0SD User Manual Download Page 259

NVIDIA Video Driver Controls

Microsoft Hybrid Graphics C - 3

C

How the Technology works

When the system is powered up and is displaying just the desktop, the dGPU will be
powered off. In this case the system is running in the same way as a system without
a discrete graphics solution. However when an application that requires use of the
dGPU is run (e.g, a game or HD Video), the dGPu is powered on and takes over the
processing duties. If the program is closed, then the dGPU will be powered back
down again until required.

Customization 

Options

Although 

Microsoft Hy-

brid Graphics

 is com-

pletely seamless to the
user, NVIDIA also allow
customization options
within the control panel
(see 

“Customization

Options” on page C -
28

).

Summary of Contents for N1X0SD

















































































































































































































































































































































Reviews:

No comments